If you’ve ever towed a trailer, boat, or large load, chances are you’ve relied on a jockey wheel to maneuver your setup when unhitched. But when that jockey wheel feels too loose, wobbly, or too tight to turn, it’s not just an annoyance—it can lead to safety issues, uneven wear, or even permanent damage to the wheel itself. As a jockey wheel supplier who’s worked with thousands of tow truck operators, RV owners, and small business fleets over the past 12 years, I’ve seen firsthand how a simple tension adjustment can extend the life of a jockey wheel by 30% or more. Today, I’m breaking down exactly how to adjust that tension correctly, why it matters, and common mistakes to avoid. Jockey Wheel

First, let’s get clear on what jockey wheel tension actually is. The tension refers to the amount of friction between the wheel’s inner hub and its mounting bracket, controlled by a central bolt or nut on most standard jockey wheel models. Too little tension, and the wheel will wobble from side to side, making it hard to steer or lift the trailer evenly. Too much tension, and you’ll put unnecessary strain on the wheel’s bearings, drag when you try to turn it, or even prevent the wheel from folding up when you’re on the road—posing a hazard if it swings out and hits other vehicles or obstacles.
Before you grab any tools, there are a few quick pre-adjustment checks you should do to make sure you’re working on a safe, stable setup. First, park your trailer or towed vehicle on a flat, level surface. Engage the trailer’s handbrake, and if you’re working alone, chock the main trailer wheels (the ones that connect to the tow hitch) to prevent it from rolling while you adjust. Next, inspect the jockey wheel itself: look for bent parts, cracked hubs, or worn bearings. If any of these are present, adjusting tension won’t fix the problem—you’ll need to replace the wheel first. That’s one of the most common calls I get from customers: they adjust tension on a damaged wheel, which only makes the damage worse.
Now, let’s walk through the step-by-step adjustment process, which works for most fixed-mount jockey wheels (the most common type used for trailers, ATV trailers, and small boat trailers). For heavy-duty jockey wheels used for construction equipment or large RVs, the process is almost identical, just with larger tools.
-
Loosen the Central Lock Nut
Start by locating the central bolt or nut that runs through the jockey wheel’s hub and mounting bracket. This is the part that controls tension. Use a wrench or socket set (usually 14mm to 19mm, depending on your wheel’s size) to loosen this nut about half a turn—don’t remove it completely. You want it loose enough that you can move the wheel, but still attached so you can make small tweaks. -
Test the Wheel’s Movement
With the lock nut loose, lift the jockey wheel off the ground so it’s fully extended. Grab the top of the wheel and try to wiggle it side to side. If it moves more than about 5mm (a quarter inch), the tension is too loose. If it doesn’t move at all and you have to force it to turn, the tension is too tight. This quick test will tell you which direction to adjust. -
Adjust the Tension Nut (or Bolt)
If the wheel is too loose: Turn the central bolt (not the lock nut) clockwise. This pulls the hub closer to the mounting bracket, increasing friction and reducing wobble. Turn it in small increments—usually a quarter turn at a time—then retighten the lock nut slightly to hold that position, then test again.
If the wheel is too tight: Turn the central bolt counterclockwise to loosen the friction. Again, small increments are key. If you loosen it too much, you’ll end up back where you started with a wobbly wheel. For standard 10-inch jockey wheels (the most popular size for recreational trailers), one full turn of the central bolt changes tension by about 2mm, so tiny adjustments make a big difference. -
Fine-Tune for Load
Here’s a step most first-timers skip: test the tension under a light load. Extend the jockey wheel to its maximum height, then put a small amount of weight on it (about 20-30kg, or the weight of a standard coolers and tools) to simulate when you’re lifting the trailer onto a hitch. Wiggle the wheel again—if it wobbles at all, you need to increase tension by another quarter turn. If it drags when you turn the crank to lift the trailer, loosen it a quarter turn. This ensures the tension works not just when the wheel is off the ground, but when it’s bearing weight, which is when you use it most.
Now, let’s talk about why this matters beyond just convenience. From a safety standpoint, a wobbly jockey wheel can cause uneven towing. If one side of the trailer is higher than the other because the jockey wheel is lopsided, it pulls the tow vehicle to one side, making steering harder and increasing the risk of a collision at highway speeds. For business fleets, a misadjusted jockey wheel adds wear to the trailer’s axles and tires, leading to more frequent replacements and higher maintenance costs. We’ve had customers who fixed their jockey wheel tension and reduced tire wear by 20% in the first six months—no exaggeration.
Another common mistake I see is people tightening the central nut too much, thinking more tension means better performance. That’s not true. Excess tension wears out the wheel’s internal bearings quickly. Bearings are designed to rotate smoothly, so forcing the hub too tight creates friction that overheats and breaks down the bearing grease. A wheel with over-tight tension will usually start making a grinding noise within a few months, which is a sign it’s damaged and needs replacement.
What about telescopic jockey wheels (the ones that extend and retract for storage)? The tension adjustment works the same way, but you’ll also want to check the lock pins that hold the wheel in place when it’s retracted. If those are loose, they can allow the wheel to shift, which feels like improper tension. If your telescopic wheel wobbles only when it’s retracted, the lock pin is the first thing to check, not the central bolt.
If you’re dealing with a power jockey wheel (electrically operated, common for large RVs), the adjustment process is slightly different. Most power jockey wheels have a tension control dial on the motor unit instead of a central bolt. To adjust it, first disconnect the power to avoid accidental activation, then turn the dial clockwise to increase tension (to fix wobble) or counterclockwise to decrease it (to fix drag). The same test rules apply: check the movement with the wheel extended and under a small load.
Now, when should you adjust jockey wheel tension, anyway? It’s not just a one-time installation step. You should check the tension every three months, or every 50 hours of towing, whichever comes first. Other times to adjust: after a long trip on rough roads (vibration can loosen bolts), after storing your trailer for more than a month (seized bearings can change tension), or if you notice any wobble or drag when using the wheel.
If you’ve tried adjusting the tension multiple times and the wheel still wobbles or drags, that’s a sign it’s time for a replacement. As a supplier, I often tell customers that a good jockey wheel should last 5-7 years with proper maintenance. If yours is older than that and adjustments aren’t working, don’t force it—get a new one. A faulty jockey wheel can cause a trailer to tip while unhitching, which can lead to injuries and expensive damage to your tow vehicle or trailer.
If you’re working on a heavy-duty jockey wheel for construction equipment or livestock trailers, there are a few extra tips. These wheels are designed to handle 500kg or more, so you’ll need a heavy-duty wrench to adjust the central bolt. Also, check the mounting bracket itself for rust or corrosion, which can make tension adjustments impossible. If the bracket is rusted, clean it with a wire brush and lubricate it with waterproof grease before adjusting tension—this will make the wheel move smoothly and prevent future loosening.
Now, let’s wrap this up: adjusting jockey wheel tension is a simple, low-skill task that takes 10-15 minutes, but it makes a huge difference in safety, performance, and the lifespan of your wheel. The key steps are: flat surface, engage the handbrake, loosen the central lock nut, test movement, make small adjustments to the central bolt, retighten the lock nut, and test under load. Avoid over-tightening, and adjust regularly to keep your wheel in good shape.

If you’re in need of new jockey wheels, replacement parts, or have questions about adjusting your specific model, feel free to reach out. We’ve supported tow operators, RV owners, and small businesses for years with high-quality, durable jockey wheels built for all types of loads. Whether you’re replacing a worn wheel or need a heavy-duty option for a construction trailer, we’re here to help you find the right fit and answer any questions you have about maintenance and tension adjustment.
Electric Trailer Jack REFERENCES
Trailer Industry Association. (2022). "Jockey Wheel Maintenance and Safety Guidelines." National Trailer Safety Standards.
Smith, J. (2021). "Common Adjustment Mistakes for Towing Equipment." Journal of Recreational Vehicle and Trailer Maintenance.
Heavy Equipment Safety Alliance. (2023). "Heavy-Duty Jockey Wheel Operation and Adjustment Manual."
Ningbo Guterui Auto Parts Co., Ltd.
As one of the most professional jockey wheel manufacturers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality jockey wheel made in China here from our factory. We also accept customized orders.
Address: No.70 Guanhai Road, Beilun District, Ningbo City, Zhejiang Province
E-mail: chocol.xu@guterui-autoparts.com
WebSite: https://www.guterui-autoparts.com/