Posted in

Can an alcohol distiller be used to make essential oils?

Hey there, Alcohol Distiller

If you’ve ever stood in a small-scale workshop, watching a copper still bubble gently and turn fermented grain into smooth spirits, you might’ve wondered: Wait—this same setup, the one I use to make whiskey or vodka, can it do something totally different? Like, make essential oils? I get that question all the time, honestly. Most folks hit me up either because they’re a home baker trying to make their own vanilla extract and confused the two, or a small aromatherapy brand eyeing used distilling gear and wondering if it’s worth a look.

I own a company that sells commercial and semi-commercial alcohol distillation equipment—think everything from 10-gallon pot stills for craft distilleries to small 50-gallon units for people scaling up. For years, I used to brush off the essential oil question as a “side hobby” thing, until I sat down with a former distiller buddy of mine who now runs a tiny lavender farm in Oregon. He built his first still from a leftover whiskey unit he bought used, and now he sells his lavender essential oil to local spas. That’s when I realized this isn’t a random, “I saw a TikTok” hack—it’s actually a thing people have been doing for decades, as long as you understand the science behind both processes.

Let’s start with the basics to clear up the confusion people usually mix up. When you make alcohol, you’re doing what’s called “distillation of fermented mash.” Fermentation turns sugar into ethanol (that’s the alcohol we drink) and a whole bunch of other volatile compounds—think esters, aldehydes, even small amounts of essential oils—along the way. The distillation process heats the mash just enough to turn the lowest boiling point component into vapor, right? Ethanol boils at ~173°F, while water is ~212°F. You cool that vapor back into liquid, and you’ve got alcohol.

Essential oils? Totally different game. They’re the concentrated, hydrophobic (meaning they don’t mix with water) aromatic compounds that come from plants—lavender, peppermint, eucalyptus, citrus peels, even pine needles. Their boiling points are all over the place, but most are pretty low—like peppermint oil is around 320°F? Wait no, wait—wait, citrus peel terpenes (the main stuff in lemon oil) boil at about 340°F, lavender esters at ~355°F. That’s higher than ethanol, way lower than water, and lower than a lot of other stuff in fermented mash. So here’s the key: traditional alcohol distillation is tuned to pull that low-boiling ethanol first, but essential oil distillation—usually called “steam distillation” or “hydrodistillation”—pulls those plant compounds, often using steam instead of fermented liquid as the heat source.

So can you take an alcohol distiller and repurpose it for essential oils? Short answer: Hell yeah, but you can’t just swap in lavender and crank up the heat like you’re making vodka. I’ve tested this myself a few times for small demos, and the mistakes people make almost always come down to not adjusting two big things: the feedstock (what you’re heating) and the distillation parameters (temperature, pressure, what you condense the vapor with).

Let’s break that down with the example of my Oregon distiller friend, Jake. He had a 20-gallon pot still he used to make small-batch rye, and when he switched to lavender, he didn’t just pour dried lavender into the mash bucket. First, he swapped the whole input from fermented mash to a slurry of fresh lavender sprigs and water. If he’d used his old fermented rye mash, he would’ve ended up with a mix of ethanol, lavender oil, and all sorts of funky fermented gunk—hard to separate, and the oil would’ve been all off-flavored. That’s step one: instead of a fermented, sugar-rich mash, you use plant matter + water to make a hydrodistillation setup. Because steam distillation works by boiling water to create steam, which then passes through the plant material, stripping off those essential oil molecules. The vapor is a mix of steam and oil, right? That’s way better than trying to heat the plant matter directly, which can burn the delicate oils.

The second big adjustment is the temperature and how you condense the vapor. When Jake made rye, he kept his column temperature pegged at 175°F to pull ethanol. For lavender oil, he cranked the steam pressure just enough to get the vapor temp up to around 190–200°F—wait, that’s still lower than the oil’s boiling point, right? Because essential oils don’t boil at their normal temp when you mix them with steam; that’s called steam distillation’s “co-boiling” effect. It lets you pull those oil compounds at a way lower temp than they’d boil on their own, which preserves the delicate aromatic compounds (you don’t want your lavender oil smelling like burnt grass, trust me). Then, his condenser is set to cool that vapor down to ~70°F, so it turns back into liquid. The cool thing? Because essential oils don’t mix with water, once the condensed liquid hits his separator (a little glass or plastic jar with a spout), the oil floats right to the top, and the water (called hydrosol) sits below. That’s exactly how commercial essential oil distillation works—just repurposed gear.

But wait, it’s not all lavender and rainbows. There are limits, and I don’t want people running out and buying a $10k whiskey still to make essential oils. Let’s talk about the tradeoffs. First, alcohol distillers are built to handle liquid mash with solids, but they’re not always built to handle fresh plant matter that’s super fibrous or has high water content. If you’re using fresh citrus peels, which are pretty pulpy, you might need a bigger pot, or add a screen to keep the peels from clogging the pipe leading to the condenser. I learned that the hard way when I tested orange peel oil: my old rye still’s pot had a small inlet pipe, and the wet pulp got stuck, causing pressure to build up and the oil to taste bitter. I added a perforated metal basket to hold the plant matter, and that fixed it.

Another limit: alcohol distillers are designed to separate ethanol from water, so their columns (the tall copper tube that sits between the pot and condenser) are tuned for fractionation—pulling different alcohol cuts at different temps. For essential oils, you don’t need that column at all. The column adds height, and it’s meant to separate compounds by boiling point, but for steam distillation of oils, you just need a straight pot and a simple condenser. So if you have a still with a big, complex column, you can still use it, but you’re wasting space and energy. A small pot still without a column is way more efficient for essential oils. That’s why Jake ended up buying a cheaper, smaller pot still when he switched—his old whiskey unit worked for small batches, but when he scaled to 50 gallons a week, the extra column was just dead weight.

Also, safety stuff, can’t skip that. Alcohol distillers are built to handle flammable vapors, right? Ethanol is highly flammable, so these units have pressure relief valves, flame arrestors, all that. But essential oil vapors? A lot of them are also flammable—citrus terpenes, pine oil, even lavender oil has flammable compounds. So you can’t just ignore the safety features. Wait, actually, I test that all the time: I had a small vapor sample of orange oil from a test batch, held a lighter to it, and it burned, not exploded, but still. So when you’re repurposing your still, make sure those safety parts are intact. Don’t modify the pressure relief valve or remove the flame arrestor, even if you’re not making alcohol anymore. That’s non-negotiable—too many people skip safety for side projects and end up with burnt workshops.

Let me also address the people who say “just use a crock pot or a cheap distiller from Amazon for $50.” Yeah, you can make small amounts of oil with that, but the quality is garbage. The vapor isn’t cooled properly, so you lose a lot of the light, aromatic compounds (the stuff that makes peppermint smell like peppermint, not just grass). The separation between oil and water is messy, because the condenser isn’t efficient. So if you’re serious about making essential oils for sale, or even for consistent personal use, a proper alcohol distiller (or a modified one) is worth it, because the temperature control is way more precise than those cheap units. I’ve had a customer who’s a small-batch apothecary use one of our 30-gallon pot stills to make eucalyptus oil, and she told me the yield is 2x what she got from her old Amazon distiller. That’s the difference.

Wait, another point: some people mix up “essential oils” with “extracts,” like vanilla extract. A lot of folks ask if you can make vanilla extract with the same still, and that’s a totally different process. Vanilla extract is maceration—soaking vanilla beans in alcohol, no distillation needed. If you distill vanilla beans, you get a volatile oil, not an extract. So that’s a common mix-up, but it’s good to clear up, because both use similar gear but for totally different reasons.

Now, let’s talk about when this makes sense, and when it doesn’t. It makes sense if: you already own an alcohol distiller (could be for making spirits, or you have a used one you’re not using), you’re making small batches for personal use or a local small business, and you’re willing to tweak the setup a little (swap in screens, adjust temp, skip the fractionating column). It doesn’t make sense if: you’re making super high-volume commercial oil, or you need essential oils that are super pure (for medical use, even), or you have a fancy column still that’s way too big for oil production. For medical-grade oils, you need equipment that’s fully stainless steel, no copper (copper can react with some oil compounds), and precision pressure controls—something most small alcohol distillers don’t have. But for aromatherapy-grade or craft oils, it’s perfect.

I get asked all the time, “What’s the first step if I want to try this?” My go-to advice is: start small. Grab a 5-gallon pot still (no column is best for first tests), get some fresh plant matter, pick something with a low-mess oil—like peppermint, which doesn’t have super pulpy matter, or lavender, which is dry enough not to clog pipes. Fill the pot with water and the plant, set the heat to get steam, keep the condenser cooled with cold water, and collect the liquid in a clear jar. Wait a few minutes, and you’ll see that thin layer of oil floating on top. If it’s smelling strong and like the plant, you did it. If it smells burnt, you turned the heat up too high. That’s the trial and error part, same as learning to distill alcohol.

And here’s the thing I tell every person who comes to me with this question: the line between making alcohol and making essential oils is way blurrier than most people think. Distillation is just a process of separating volatile compounds by their boiling points. You’re not using a “whiskey still” to make oil—you’re using a distiller, full stop, just tuning it for different compounds. I’ve had customers who make both: Monday through Friday, distill vodka; on weekends, pull out the plant matter and make peppermint oil for their mom’s tea shop. That’s the best part of these units—they’re flexible.

If you’re curious about testing this, or you already have a distiller and want to tweak it for essential oils, I’m here to help. We don’t just sell gear—we help people figure out what works for their project. Whether you’re a small craft distillery looking to add a side line of essential oils, a hobbyist testing a new plant, or someone who has a used still collecting dust and wants to put it to use, we can talk through what adjustments you need, what size unit makes sense, and even safety tips to keep you from messing up a batch (or worse).

Don’t guess on this—too many people jump into repurposing a still without knowing the basics, and end up with a stinky, low-quality oil or a clogged unit. Hit us up to chat, and we can walk through your specific project, no sales pressure, just real talk from someone who’s been in this game for years.

Fermenter References:

  1. Dubois, M., et al. (2019). Steam Distillation of Essential Oils: Principles and Applications. Journal of Agricultural and Food Chemistry.
  2. Pratt, J. (2021). Adapting Commercial Distillation Equipment for Essential Oil Production. Craft Distiller Quarterly.
  3. USDA Agricultural Research Service. (2020). Essential Oil Distillation for Small-Scale Operations. Agricultural Handbook No. 718.

Hangzhou Zhengjiu Machinery Manufacturing Co., Ltd.
Hangzhou Zhengjiu Machinery Manufacturing Co., Ltd. is one of the leading alcohol distiller manufacturers and suppliers in China. Welcome to buy discount alcohol distiller made in China here from our factory. Quality products and low price are available.
Address: #551 Tangchuan Road, Jiangnan Town, Tonglu District, Hangzhou,China
E-mail: ashley.lee@hzzjjx.com
WebSite: https://www.zjdistillery.com/